Verex Monitor ISM Especificações descarregar pdf (Página 46)

42 MONITOR ISM™/AFx™ IP Connectivity Guide

22-9058 v2.1

• ( - ): Initialization error. If the dash appears as an

"A", you have a digital account ID mismatch between

the panel and the IP receiver software ("Digital ID"

connect mode). If this appears as an "S", you have a

serial number mismatch between the panel and the IP

receiver software ("Serial Number" connect mode). If

this appears as an "L", you have an SIP Address

mismatch between the panel and the IP receiver

software ("SIP Address" connect mode). If this

appears as an "M", contact your support rep.

t x: Represents the polling timeout code ‘t’

before detecting SIP failure after ‘x’ time

delay.

x = Delay Cycle

0 10 seconds 0 – 2

1 15 seconds 3 – 5

2 30 seconds 6 – 10

3 45 seconds 11 – 15

4 60 seconds 16 – 20

5 90 seconds 21 – 30

6 2 minutes 31 – 40

7 3 minutes 41 – 60

8 8 minutes > 60

3 X the poll rate set in the IP Interface Module

Config Program / SIP programming screen /

Advanced Setup / Cycle.

E.g. Timeout in the SIP program screen =

3(00). t x in the LCD keypad Data screen =

t 3 – the panel will detect SIP failure and

switch to dialler back-up (must be set in

Director Account Configurations / System /

Communication. See Sect 3.4, NOTE2) after

45 seconds of no polling.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52

Sem comentários

Verex Monitor ISM Especificações Página 46